Universal Testing Machine for Sheet Metal Tensile Testing up to 100 kN
The ProLine Z100 TN is a universal testing machine for standardized materials testing. This sheet metal testing configuration combines a maximum test load of 100 kN with wedge grips and a choice of clip-on or makroXtens extensometer.
Its rigid two-column frame, accurate force measurement, and intuitive testXpert software help you perform routine tests consistently and efficiently.
Key features:
- ProLine is the ideal testing machine for function tests on components and standard tests on materials.
- ProLine employs a high-quality two-column load frame with steel columns for precise crosshead guidance.
- High-quality, maintenance-free AC drive technology and online correction of machine compliance enable highly accurate travel-measurement and positioning.
- Specially matched extensometers, test fixtures and specimen grips are available for ProLine.
- Nominal force 100 kN
- Test area (W x H) 640 x 1360 mm
- High test-speed (0.0005 ... 300 mm/min) right up to nominal force
- Innovative testControl II electronics
Included Accessories:
Xforce P Load Cell
- Force range: 400 N...100 kN
- High-precision load cell with wide measurement range
- Axis-symmetric principle, thus minimized sensitivity to parasitic forces (transverse forces, bending moments, torque)
- Extremely robust, high operating force up to 150% of their capacity
- Unique electronic identification system
Body Over Wedge Grips
- Body over wedge grips, Fmax 100 kN
- Smooth opening and closing throughout the application area is guaranteed by a unique design with weight force compensation
- No parasitic forces are generated when gripping the specimen
- Perfect fit for alignment-critical applications and cross tension sensitive specimens
- Symmetrical closing ensures identical grip-to-grip separation independent of specimen diameter
- Self-clamping via wedge action
-
Opening width max. 22 mm (dependent on jaw inserts)
Choose your extensometer
Version: Clip-on extensometer
Manually attaches directly to the specimen for strain measurement.
- For tests on metals, rigid plastics and composites
- Meets the increased requirements for the determination of the tensile modulus according to ISO527-1 Annex C
- Fast, easy extensometer attachment and removal with convenient one-handed operation, even while wearing glove
- Initial gauge-length automatically locked on attachment and removal, eliminating operator influence
- Compact design allows use even in narrow temperature chambers
- Single-sided strain gauge system
- Accuracy Class 0.5 to EN ISO 9513 up to 15 mm measurement travel
- Accuracy Class 1 to EN ISO 9513 up to 25 mm measurement travel
- Initial gauge length 50 mm or 2 inches
- Measurement travel for tensile tests 25 mm
- Measurement travel for compression tests 5 mm
- Flat specimens up to 20 mm thickness, 32 mm width (dependent on jaw inserts)
- Overall height: 90 mm
- Weight 118 g
Version: ProLine makroXtens extensometer
The ProLine makroXtens HP is a high-resolution extensometer for tensile tests on metals, plastics, hard foam materials, and materials with low to average specimen strain.
- Deformation of the specimen is recorded in the elastic and plastic deformation range throughout the entire test until specimen break. Low drag force and the ability to adjust the contact force of the sensor arms as needed means you can test sensitive specimens reliably and with traceability.
- Very high resolution and measurement accuracy over the entire measurement range.
- Tiltable knife edges prevent damage to the sensor arms and knife edges at specimen break.
- The knife edge geometry can be adjusted easily and without tools by rotating the knife edges, allowing you to test flat as well as round specimens.
- Quick release fastener for sensor arms, enabling them to be replaced without the use of tools.
- The sensor arm clamping force can be adjusted step lessly.
- Centricity is automatically ensured by positioning in the test area. Accuracy class 0.5 to EN ISO 9513. Meets the requirements to ISO 527-1 for determination of the tensile modulus
Software
testXpert III testing software
- Integrated user management for role-specific access
- Intelligent wizard for configuration of all test-relevant settings
- Repeatable test conditions and check function of connected sensors
- Compatible with Windows operating system
The following testXpert functions are included with the testing machine:
- Test programs for determining the maximum force and extension
- Performance and recording of a manual test
- Subsequent evaluation of specimens and series for calculation under changed specifications or the creation of new results
- Tolerance monitoring of all results
- Complete statistical evaluation of the test results and tolerance monitoring
- Force and strain control
- Operator and specimen protection
- Full CSV and ASCII export of parameters, results and raw data
- Pre-defined test report in PDF format
- User management for protection against unauthorized use of the testing machine and test data
- Real-time correction of the machine deformation (correction curve)
- Direct connection of specimen measuring devices to testXpert III
Optional Accessories
Safety Door for Use with makroXtens Extensometer
The swiveling front safety door helps protect the operator from fragments and other hazards caused by specimens during testing. Electrical interlocking and mechanical guard locking prevent the door from opening during a test or while hazardous machine movement or test forces remain.
The door features a replaceable, 6 mm polycarbonate panel and a left-side pivot for access to the test area.
Required for applications that present a risk of injury to the operator.
Safety Door for Use with Clip-On Extensometer Including Capture Device
The swiveling front safety door helps protect the operator from specimen fragments and other specimen-related hazards. Electrical interlocking and mechanical guard locking prevent the door from opening during testing or while hazardous machine movement or test forces remain.
The safety door is required for applications that present a risk of injury to the operator.
The safety shield includes a device for removal before break without opening the safety device. The clip-on is gently removed from the specimen by a cord and captured by a second cord.
Base
Base for ProLine Z030 to Z100
- For installation of the testing machine at an ergonomic operating height
- Height: 486 mm
- With drawer for loads up to 50 kg
- Estimated weight of the testing machine Proline Z100 TN in case of customer-supplied equipment approx. 650 kg.