Universal Testing Machine for Rubber and Elastomer Testing up to 2.5 kN
The ProLine Z005 TH is a compact universal testing machine for standardized tensile and tear growth tests on rubber and elastomers. With a maximum test load of 2.5 kN and an extended-height frame, it provides room for materials that undergo substantial elongation during testing.
Its precise crosshead guidance, accurate force measurement, and intuitive testXpert software help you perform routine tests consistently and efficiently.
Key features:
- ProLine is the ideal testing machine for function tests on components and standard tests on materials.
- ProLine employs a high-quality two-column load frame with steel columns for precise crosshead guidance.
- High-quality, maintenance-free AC drive technology and online correction of machine compliance enable highly accurate travel-measurement and positioning.
- Specially matched extensometers, test fixtures and specimen grips.
- User-friendly testXpert III software with predefined standards-based test methods
- Nominal force 2.5 kN
- Test area (W x H) 440 x 1470 mm
- High test-speed (0.0005 ... 1500 mm/min) right up to nominal force
- Innovative testControl II electronics
Included Accessories:
Xforce P Load Cell
- Force range: 10 N...2.5 kN
- High-pecision load cell with wide measurement range
- Minimized sensitivity to parasitic forces
- Extremely robust, high operating force up to 150% of capacity
- Accuracy class 1 according to ISO 7500-1 from 10 N, accuracy class 0.5 from 50 N
Pincer Grips
- Simple and rapid specimen clamping
- Sideways movement allows self-alignment to the test axis
- Self-clamping
- Max. Opening width 20 mm
ProLine Longstroke Extensometer
- Direct measurement of high strains on elastomers, plastics and similar materials
- Measurement up to specimen break enabled by pivoting knife edges and robust measurement system
- Accuracy Class 1 from 2 mm according to EN ISO 9513
- Max. measurement travel 1000 mm (- initial gage-length)
- Initial gage-length Le: 10...200 mm with stepless adjustment
- Resolution 3 µm
- Manual attachment of sensor arms to specimen
- Easy Le adjustment and centering of sensor arms between specimen grips
- Max. drag force 0.2 N
- Max. specimen thickness 0...15 mm, width 0...30 mm
- Tilting interchangeable steel knife-edges
Software:
testXpert III testing software:
- Integrated user management for role-specific access
- Intelligent wizard for configuration of all test-relevant settings
- Repeatable test conditions and check function of connected sensors
- Compatible with Windows operating system
The following testXpert functions are included with the machine:
- Test programs for determining the maximum force and extension
- Performance and recording of a manual test
- Subsequent evaluation of specimens and series for calculation under changed specifications or the creation of new results
- Tolerance monitoring of all results
- Complete statistical evaluation of the test results and tolerance monitoring
- Force and strain control
- Operator and specimen protection
- Full CSV and ASCII export of parameters, results and raw data
- Pre-defined test report in PDF format
- User management for protection against unauthorized use of the testing machine and test data
- Real-time correction of the machine deformation (correction curve)
- Direct connection of specimen measuring devices to testXpert III
Optional Accessories
Base
Base for ProLine Z005 to Z020
- For installation of the testing machine at an ergonomic operating height
- Height: 636 mm
- With drawer for loads up to 50 kg
- Estimated weight of the testing machine Proline Z005 TH in case of customer-supplied equipment approx. 220 kg.